Robert,
Thank you for pointing that out. Let me reach out to our web guys and see if there is anything we can do about that. We are certainly not married to this font so I imagine changing it would be trivial. Famous last words :)
Thanks for watching,
Don Pezet
Host, ITProTV

Leigh,
Hello, glad you contacted us. I'm in the same situation that you are living in a rural telecom blackhole, I have to have satellite which gives me about the same limits.
The vimeo stream are smaller but they are still sizeable.
If you're an annual user, you can also do what a lot of us that are facing caps do which is to download stuff while were here at work or at another location so that we can watch it without worry about the limits. It's not ideal it is though the most comprehensive way to get the material.
Cordially,
Ronnie Wong
Host, ITProTV

Randall,
Disclaimer: I am not a radio engineer and have no license to be one. But...that will not prevent me from giving you an answer!
As I understand it. What you're seeing from the awesome Ubiquiti Software requires an understanding of the following:
1. RF Antennae
2. Terminology
3. Ubiquiti's ability to report on something you cannot control.
When signal goes out, there is an expectation of how that signal leaves the antenna (vector--it's supposed to go this way). So there is a reference angle, path, whatever that the signal is supposed to travel.
There is also the reality that signals go where signals go (actual vector--it's going this way instead). This is a deviation from the reference...which represents an error.
The difference between how it's supposed to go this way and the way it's going is called EVM (Error Vector Magnitude). This expression is normally a ratio. A flawless signal leaving the antenna would have ratio of 0.
Ok...so this ratio is the space between reference and reality that constellation.
So your constellation shows you graphically what may be the noise or distortion mechanism degrading the EVM and causing that ratio to go higher. You may change some configuration on your ROCKET AC and come back to constellation and you see the symbols change. The more diffuse the constellation the greater the impairment on your signal; the more tightly grouped the better the signal is closer to the reference vector--in other words the better your access point is functioning without interference from anything.
Though, neat. You and I would not tend to use them, except in the way I'm describing for your ROCKET AC. Change configuration and see if your constellations are closer together...if not change it back...if so keep the change. But this is normally for people who design equipment.
Hope this clarifies rather than muddles!
Cordially,
Ronnie Wong
Host, ITProTV

And tell your companies IT staff to switch to Geo-IP based filtering instead of just relying on the TLD/ccTLD, as the latter is often irrelevant and incorrectly filtered.

+1 on using dedicated SD cards.
On Dell servers (probably others) they also offer a Dual SD card option where the two SD cards are mirrored in a RAID-1 style, thus providing another layer of redundancy in case one fails. This option is not that expensive (~$80 off the top of my head). We've been using it more frequently for ESXi deployments, especially in SAN environments.
In the past, we had to go with an internal PERC controller plus at least 2 drives, even if we weren't going to use the DAS for a datastore. If you don't have centralized storage, then it's not as important since you will use the internal drives. But if you are using a SAN, it is often a big waste, which the SD cards eliminate. You can than take the money you were going to spend on the internal drives and put it into more SAN space. We haven't had any issues going this route and like it a lot.

Michael,
Google doesn't provide a policy specifically for that. Instead, you would need to rely on your client operating system policies. For example, in Windows you can use a GPO and AppLocker to restrict running web browsers other than the Chrome for Work deployment containing your Google Apps policy. In OS/X you can use the Profile Manager that comes with OS/X Server to restrict browsers like Safari from running, and only allow Chrome. Profile Manager will also take care of iOS devices like the iPhone and iPad also. It gets a little trickier when it comes to Windows Phone and Android devices as they don't typically provide for a consistent management methodology.
Let me know if you need me to go in more detail on any of those options.
Thanks for watching,
Don Pezet
Host, ITProTV

Hi there,
I'm having the same issues as Justin Lee in the RAM section for the A+ course. Do you have an eta of when they will be posted?
Thanks,
Alex

Kevin,
Thanks for writing in, and I appologize for the delay in getting back to you. I am still playing catch-up after the holiday. The official Google answer to your question is:

In most cases, restoring a deleted user account restores the user's email, calendar events, and other data. However, Google doesn't guarantee full data recovery for deleted users.

I have done it a handful of times and I find that as long as I didn't transfer the user's data, it was restored along with the user's account. However, if I did transfer their data, it was left in the new location even after the user was restored.
Hope that helps,
Don Pezet
Host, ITProTV

What about ITprotv Forum app?
I bet you guys aren't rolling your own forum software so there has to be a Forum app that works with whatever library you guys are on.
Not asking for a new app or inclusion of the actual app in development, just searching for a forum aggregator app that will work with this forum.

I would just like to say to anyone wanting a fast up and go tutorial on wireshark the ITProTV ones are ace.

It will also depend on your motherboard, you might be able to use 'legacy boot' and put it on top of boot order.
OR
You can use RUFUS it's a (new?ish) tool that can create usb sticks for uefi. I installed windows10 using that.

Allen,
Thanks for writing in. I have used several programs for de-duplication over the years. The one that worked best for me was a product called UltraCompare. It contains a duplicate detection feature that will help eliminate the duplicates and a synchronization feature that would let you combine the remaining unique files into one common repository (if desired. It's not free, but it isn't too expensive at $50. It is also cross-platform (Windows, Mac and Linux) which is nice.
Hope that helps,
Don Pezet
Host, ITProTV

Hi I was able to get this to work properly. What i did was to place them into plex as a tv show and followed this naming convention (Show Title) - (s01e**) - (Show Title) . setting it like this and having them in a seperate folder for each show and and placeing each show into plex independently seemed to work for me without any issues.

Thanks for the quick response.

Steve,
The entire team celebrates with you in your success! It encourages us to produce more and better content every day when we get these notifications of our subscribers success and we hope you'll share with your friends the help that ITProTV has been for you. We know you're the best investment we can make to the future of ITProTV.
In the way that CompTIA's CE works, you're correct, every time you take another CompTIA exam that is considered equal to or more advanced level then your other CompTIA certifications will also renew.
Cordially,
Ronnie Wong
Host, ITProTV

It looks like something happened to my post and the URL is now wrong... strange. Anyhow, here is the correct URL:
http://itpro.tv/lessons/overview-of-mcsa-windows-server-2012-70-410/
I'll edit my above post so it is correct there too.
Thanks again,
Don Pezet
Host, ITProTV

Debra,
Don't forget to post here in our ITProTV forums, we monitor and answer all content related things here. We're very happy you're enjoying the content and you and our subscribers are the reason we exist!
Cordially,
Ronnie Wong
Host, ITProTV

Thanks!