VRF with EIGRP and OSPF (Static only) (CCNP)
-
https://wp.scsiraidguru.com/?page_id=1937
I took my VRF with OSPF configuration and added the EIGRP VRF commands. I left the outside world static routes in OSPF to show OSPF still works. Check out the sh ip route vrf commands to see it
Routing Table: Engineering
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfRGateway of last resort is 192.168.32.1 to network 0.0.0.0
O*E2 0.0.0.0/0 [110/1] via 192.168.32.1, 03:36:56, GigabitEthernet0/1
172.16.0.0/24 is subnetted, 1 subnets
S 172.16.1.0 [1/0] via 192.168.32.1
S 192.168.1.0/24 [1/0] via 192.168.32.1
192.168.32.0/24 is variably subnetted, 7 subnets, 2 masks
C 192.168.32.0/30 is directly connected, GigabitEthernet0/1
L 192.168.32.2/32 is directly connected, GigabitEthernet0/1
C 192.168.32.4/30 is directly connected, GigabitEthernet0/2
L 192.168.32.5/32 is directly connected, GigabitEthernet0/2
D 192.168.32.8/30
[90/15360] via 192.168.32.6, 03:37:09, GigabitEthernet0/2
D 192.168.32.12/30
[90/20480] via 192.168.32.6, 03:37:09, GigabitEthernet0/2
D 192.168.32.16/30
[90/15360] via 192.168.32.6, 03:37:09, GigabitEthernet0/2 -
@michael-mckenney,
Thanks for sharing!