@Veerakumar-Sathiaseelan,
Something to consider, one of the issues that you may run into is that Ansible has this unspoken assumption that you are using a Linux machine. That doesn't mean that you can't use a Windows machine, but something to keep an eye on if you start getting weird behavior when trying to run Ansible commands.

Thank you for the reply Ronnie.

I will complete the course as you stated - "watch the episode and if I do a demonstration is make sure you understand it, then try and see if you can replicate it in the lab....if not at least use their lab to gain a similar understanding of the concept."

I will continue to watch videos and follow your demonstrations and exercises as per videos, along with the along with the practice labs to ensure the topic is fully understood and I can replicate the exercise.

Wish you all the best and thank you for the help.
Andries

@Sherwin-Sherman said in CCNA (200-301) video corrections:

In the IP Addressing: IPv4 Basics and IPv4 Subnetting Review video, you listed the number of hosts of Class A addresses as 14,777,214 when in fact it is 16,777,214. However, I see you corrected this in the notes under errata thanks to user @Medal C'say on FB! Will there be updated videos to reflect this correction?

@Jim-Leko,

Glad you found them!

@Matthew-Smallwood,

Let me know...sometimes I believe I'm clear, when I'm not.

@michael-mckenney

0_1544638424693_fa87e53d-307c-4b9d-8508-cd2afdbdd93c-image.png

I created this simple test for tracerouting out both interfaces.

iosv-1#traceroute 8.8.8.8
Type escape sequence to abort.
Tracing the route to 8.8.8.8
VRF info: (vrf in name/id, vrf out name/id)
1 172.16.1.1 3 msec 4 msec 2 msec
2 50.4.240.1 9 msec 9 msec 8 msec
3 23.28.239.85 10 msec 9 msec 11 msec
4 76.73.165.184 [MPLS: Label 622333 Exp 0] 17 msec 8 msec 10 msec
5 75.76.35.3 [MPLS: Label 606768 Exp 0] 10 msec 10 msec 9 msec
6 75.76.35.51 [MPLS: Label 633962 Exp 0] 17 msec 17 msec 16 msec
7 75.76.35.8 17 msec 17 msec 16 msec
8 72.14.211.145 16 msec 16 msec 16 msec
9 108.170.244.1 15 msec
108.170.243.225 17 msec
108.170.243.174 17 msec
10 209.85.248.237 16 msec
209.85.251.135 17 msec
209.85.252.55 17 msec
11 8.8.8.8 15 msec 19 msec 15 msec

iosv-2#traceroute 8.8.8.8
Type escape sequence to abort.
Tracing the route to 8.8.8.8
VRF info: (vrf in name/id, vrf out name/id)
1 172.16.2.1 10 msec 1 msec 1 msec
2 192.168.10.254 1 msec 2 msec 1 msec
3 75.39.0.1 22 msec 23 msec 37 msec
4 71.151.212.33 23 msec 23 msec 23 msec
5 12.123.7.74 [MPLS: Label 25844 Exp 0] 34 msec 34 msec 34 msec
6 12.123.159.49 29 msec 29 msec 28 msec
7 12.247.252.10 31 msec
12.247.252.6 29 msec 28 msec
8 108.170.243.225 30 msec
108.170.243.174 30 msec
108.170.243.193 29 msec
9 72.14.232.239 29 msec
209.85.250.7 31 msec
216.239.63.193 29 msec
10 8.8.8.8 29 msec 29 msec 29 msec
iosv-2#

I will start creating other routers that will use a Policy Based Route to go out WAN1 or WAN2.

@michael-mckenney,
Thanks for sharing!

https://wp.scsiraidguru.com has all my Cisco Virtual Lab simulations. It even has the setup for my Virtual Lab and Fortinet 60E firewall along with VMWare. Feel free to use it all of them.

@michael-mckenney,
great work!

@michael-mckenney,
nice!